Nearly all of the time, companies will spend a lot of money to purchase their lift trucks. It is important, therefore to take good care of your machine to protect your investment into the long run. It is really a great idea to know the procedures that are undertaken during the maintenance and care of this piece of machine.
One of the best ways to tell how good the engine is running is by starting the forklift up and listening carefully to see how it works. Like for instance, if there are any knocks or misses, the machinery is defective and this must raise several concerns. Moreover listen closely for any squealing noise which come from the belts because these noises will provide you with a wealth of information.
Several of the main parts requiring attention during maintenance comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty parts or burnt out light bulbs have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
After the above components have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery must be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The transmission filter, fuel filters and the hydraulic filter should be replaced regularly. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be done. If there is a grease fitting on the axle make certain to apply some grease. Inspect the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Afterwards, inspect every other component of the machine like the wheels. If any kind of fault or issue is detected, be certain to deal with it immediately so as to make sure the equipment is running at its safest and optimum levels.